Home > Flashlights & Lighting > FOREVER LIGHT PANEL

FOREVER LIGHT PANEL

Product Description

Introducing The Forever Light Panel

This 2' x 2' panel is a soft blue-greenish light that never goes out.

What would you do with a light that doesn't use electricity or any fuel as we know it, that lights forever? Days and nights go by, weeks and years pass, decades and it is still lighting. It is just hanging there glowing. Pass it down to the next generation and it is still lighting up their life.

SAFETY

1. No Electricity

2. No Radioactivity

3. No Electromagnetic Pollution

4. No Heat Whatsoever

5. No Burnt Out Light Bulbs, No Light Failures

The fuel for the light panel is a tiny bit of heat from the surrounding air.

USES

1. Emergency Lighting That Never Fails.

2. Areas That Need Light With No Electricity.

3. Boat Cabins.

4. Stair Lights.

5. Basements.

6. Under A Porch Roof.

7. Driveway Locater.

8. Bedroom or Hallway Light.

9. Power Outages - which are becoming more frequent with our changing climate.

10. Campgrounds And Camping.

11. Your Imagination.

12. When Heated To 176 Degrees F (With A Heat Gun Or Hot Water) It Can Be Molded Into Most Any Shape.

It Can Also Be Cut Into Pieces.

The Everlasting Light looks like a blu-green plexiglas panel that is approximately 2 feet by 2 feet. In daytime it looks like it is sleeping. In a darkened room or out doors at night it comes alive and is a glowing panel of light that radiates from both sides, a double amount of light.

HOW TO USE THE PASNELS

The light panels work best if exposed to some sort of light for 10 miutes or more a day. With this brief exposure they will go all night at their brightest diminisling slowly towards the morning, but will never go out. This sets the reference point for its brightness. The reference point determines its light output.

The panels prefer to be mounted near lighting fictures or a window. They do not require direct sunlight. if protected from excessive direct sunlight they will last forever. If left without exposure to light they continue illuminating but at much reduced brightness. They may be hung from a ceiling with hangers (included) or placed slightly away from the wall (for air circulation). With light colored walls or mirrors the room will be bathed in refeletive light. They also may be framed.

One of the most unique characteristics of the panel is that it may be heated with a gun and molded into most any shape. It can't be drilled or cut at room temerature, but it becomes pliable at 176 degrees F. When heated it can be cut with sissors, drilled, or hole punched.

WHERE DOES IT GET ITS FUEL

It absorbs heat from the air. It will actually absorb any frequency from infra-red (heat) to Gamma rays and all frequencies in between. It can use the heat in the air all the way down to -112 degrees F. It doesn't take much heat to energize it. Surprisingly it absorbs energy even from the night sky.

To demonstrate this phenomena place your hand on the panel. When you take your hand away you will see its imprint as a brighter spot on the panel. This is due to the fact that it has absorbed heat from your hand and given it more fuel. This is the most exciting technology you will ever lay your hands on. As a caution, it is unwise to sleep with the panel touching your body as it will continue to deplete your body heat. These panels do not make good lovers!